Pokemon Center Beads Hand Strap Gengar

Size is approx; 10 by 2.7 by 1cm


Additional product info; Just Insert Between Your Smartphone And Case! This Bead Hand Strap Is Perfect For Preventing Drops.

Installation Method:
1. Set the strap sheet in the smartphone case and let the sheet’s tab stick out from the case.
2. Attach the smartphone to the case.
3. Attach the carabiner to the bottom of the sheet.

Usage Precautions:
 This product is an item to be used with a smartphone rear case. It cannot be used alone.
 A smartphone case is not included with this product.
 This product is a smartphone accessory ONLY. It cannot be used with tablets.
 Do not use this product for purposes other than intended.
 The load capacity of the strap sheet is approximately 5kg.
 Pulling or swinging it forcefully while installed may cause damage or the device to fall. Do not attempt this.
 Due to the nature of the material, the strap sheet may discolor over time.
 Please be aware of this in advance.
 Using this product while it is wet from rain or sweat may cause color fading or transfer.
 Please be aware of this in advance.
 Ensure there is no dust or debris on the device or case when inserting the strap sheet.
 Depending on the shape of the case, the strap sheet may not be usable. Please confirm before purchase.
 Additionally, the charging cable might not connect. In such cases, please remove the product while charging.
 Avoid storing it in direct sunlight, high temperatures, high humidity, or near fire as it may cause deformation or deterioration.
 We are not responsible for any trouble or accidents caused by the use of this product.
 Keep out of reach of small children.
 Specifications may change without notice for the purpose of improvement or enhancement.

- Usable Smartphone Case Shapes:
  Usable: Cases with an opening of 12mm or more in the bottom center.
  Not Usable: Cases that are completely open at the bottom.