The rail cleaning car is a vehicle that can remove debris and dirt from rails while it is moving.
A cleaning car for N gauge was released in 2000, and 24 years later, a cleaning car for HO rails is now released.
- A rail cleaning car with an exterior inspired by the WAM80000 type, a two-axle freight car representing Japan
- Can be used with commercially available rails with a gauge of 16.5 mm
- Theowered by dry batteries, the cleaning car itself can be connected to a locomotive or other powered car and run on the tracks, allowing cleaning to be done without being affected by the condition of the rails or the power supply method
- Uses two AA batteries (sold separately) (commercially available alkaline batteries are used)
- Equipped with a power switch on the top of the car body, the motor rotation can be switched between two levels, HIGH-LOW and OFF
- Suction fan and attachment The suction fan sucks up dust and dirt from the track.
- By replacing the suction fan with various disks, the top surface of the rail can be cleaned. If the dirt is severe, use the dry type (polishing cloth), otherwise use the wet type (cloth).
- By attaching the included felt stick and wet disk and soaking the felt stick in rail cleaner, more effective cleaning is possible.
- The coupler is equipped with a coupler that can be connected to the KD coupler.
- Able to pass through a minimum radius of R356 (excluding S-shaped linear tracks).
* The cleaning car does not move on its own, and a separate powered car is required to run it.
* Please prepare commercially available batteries separately.
The motor is powered by two AA batteries. Slide the back panel and insert two AA batteries (sold separately) to use.
JPY 
Euros
British Pounds
Australia Dollars
US Dollars
Canada Dollars
Chinese Yuan
Singapore Dollar
Hong Kong Dollar
